Rose electronic Ultraview Pro KVM SWITCH WITH ON-SCREEN DISPLAY Manual de usuario descargar pdf (Pagina 22)

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL

To change the scan time, highlight “Scan time” and press enter. An

input box will display for a new value. Enter the new scan time in

seconds and press enter. Valid entries are 1 to 999.

Scan mode

This value turns scanning on or off. To change this value, select

“Scan mode” and press enter. An input box will appear. Select

“On” or “Off” and hit enter.

Power on scan

Setting this value to “On” will enable scanning when the UltraView

Pro is powered on. To change this value, select “Power on scan”

and hit enter. Use the up/down arrow keys to select “OFF” or “ON”

and press enter.

Keyboard settings

The keyboard setting section of the configure system menu is used

to change the typematic rate and delay for PC keyboards and also

to set the language type for Sun keyboards.

Rate (keys/sec)

To change the rate value, highlight “Rate (keys/sec)” and press

enter. An input box will appear. Choose the rate value from Table 3

that represents the Rate keys/sec needed and press enter.

Rate

Keys/

Sec.

Rate

Value

Rate

Keys/

Sec.

Rate

Value

Rate

Keys/

Sec.

Rate

Value

Rate

Keys/

Sec

Rate

Value

30.0 31 15.0 23 7.5 15 3.7 7

26.7 30 13.3 22 6.7 14 3.3 6

24.0 29 12.0 21 6.0 13 3.0 5

21.8 28 10.9 20 5.5 12 2.7 4

20.0 27 10.0 19 5.0 11 2.5 3

18.5 26 9.2 18 4.6 10 2.3 2

17.1 25 8.6 17 4.3 9 2.1 1

16.0 24 8.0 16 4.0 8 2.0 0

Table 3. Typematic rate

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Comentarios a estos manuales

Sin comentarios

Rose electronic Ultraview Pro KVM SWITCH WITH ON-SCREEN DISPLAY Manual de usuario Pagina 22

Comentarios a estos manuales